You could consider using Wireshark or something like that to snoop all of the message traffic between your PC and the Keyence controller, and see what FileZilla does differently, and hopefully use that to inform the settings used under LabVIEW. I'm configuring an FTP image transfer between a Keyence VS-Series Camera (FTP client) to a folder placed in a Panel PC Windows-based (FTP server designed through Filezilla Server). This guide will walk through obtaining an optimal image for vision inspection. Select the Image Strip during operation to check the images in the FTP server on the device, as shown on the right. You can see from the name of the image that it is an image on the FTP server. Please execute the MREN instruction after the FTP upload, or use the MMOV instruction to move the image file from the SD card to the CPU memory, and then rename it via the MREN instruction. Installation and operation are simple: just determine the part to focus on and register a minimum of one OK and one NG image. Installation and operation are simple: just determine the part to focus on and register a minimum of one OK and one NG image. By configuring an FTP server to receive inspection images from a Keyence IV3 camera, and building a Roboflow pipeline to pull, organize, and utilize these images, we lay the foundation for a highly scalable, automated computer vision system. Hello all I've got a cell with four Keyence IV3 cameras that are saving images to a FTP server, we are also labeling the parts with a time date and sequenced part number label that is being printed out after we get all good images from the four cameras. KEYENCE IV Series User Manual • Ftp destination settings, Ftp destination settings -33 • KEYENCE Sensors.